Runner Change Pins

The runner change pin is recommended to be used with a multi-cavity mold or a dual cavity mold. In a multi-cavit mold, or a dual cavity mold, a difference in the filling time of each cavity tends to occur depending upon the runner balance.
MATERIAL: SKD61
HARDNESS: 40-45HRC

Installation Guidelines:

• Effective to prevent resin powders from being mixed in the products. When the resin with a high transparency etc. are used, it will generate chipping powder when the resin of the undercut part is released from the mold.
• The runner groove direction can be changed from the PL side using a hexagonal wrench as well as conventional products.
• Please use a ball plunger for positioning.