Mold Components Latch Locks

Mold Components Latch Locks was named switching ware or parting lockset, which was used for three-plate mold, its control mold plate’s process sequence unit by the way of mechanical.

Features:

• Due to double-sided locking system, safe and reliable .
• High-frequency heat-treatment, easy to process mounting hole on the tail of latch bar and control bar.

Installation Guidelines:

• Please install the housing in parallel to the parting line first.
• Before install the control bar, please cut it to the necessary length, form the bolt hole. Please tighten the screw when mold is closed. (Please note: Make sure in a full position mold before fix the control bar, and eliminate the clearance between the control bar and locking roller ) .
• Please cut the latch bar to the necessary length and installation in parallel to the parting line.
• Please install the latch lock symmetrically, otherwise, it would be fractured with the unbalanced force due to only one side of lock set be forced.
• Allows control of the mold plate opening sequence on mold bases, but not control of mold plate closing sequence function
  Only suitable for mold plate opening sequence is required.
• This latch lock is the precise standardized item, please do not apply it together with other own customer machined parts.
• If mold needs to maintain, please remove the latch locks first.
• After installed, carry out a functional test, check whether the individual parts of the latch lock units move smoothly, the stroke is applicable. Recommend testing on matched Molds machine or Injection machine, no Lifting Machine.